Signed in as:
filler@godaddy.com
Step 1 - Clean
Thoroughly clean the surface with soap and water. The home ceramic coating will only adhere to a clean, bare, and dry surface.
Step 2 - Apply
For Drip Spray Home Ceramic Coating, simply mist the coating onto the surface. Make sure it covers entire surface.
For Drip 10H Pro Home Ceramic Coating, apply the coating to the applicator pad, then gently apply to the surface using an up down/left right hatch pattern.
Step 3 - Level
Wait up to, but no more than 1 minute depending on heat and humidity. Then smooth out the coating with a soft towel or paper towel. This will spread the coating evenly throughout the surface.
Step 4 - Buff
Immediately after leveling, take a fresh soft towel and buff the rest of the coating off. The coating works on a molecular level, so you will not see it on the surface after buffing. Other than the surface looking "wet" or shiny.
If streak marks appear, finely mist the coating on and immediately wipe and buff off to remove. Streak marks usually appear due to improper prep/cleaning of the surface.
Step 5 - Let Cure
For Drip Spray Home Ceramic Coating, allow the coating to cure for 1 hour before using the surface.
For Drip 10H Pro Home Ceramic Coating, allow the coating to cure for a minimum of 10 hours before using the surface.
For both coatings rule of thumb, the longer you let it cure, the longer it will last.
